| System |
| Processors |
| Up to 2 Intel® Pentium®
III XeonTM processors at
up to 1GHz
|
Intel Xeon Pentium processors use Slot 2
form factors allowing for faster data transfers between the CPU and L2
cache |
| 133MHz
front side bus |
| 32KB
level 1 cache (16KB instruction cache and 16KB two-way
write-back data cache) |
| 256KB
full-speed, level 2 cache |
| Quad-peer
PCI Architecture that supports 64-bit/66MHz PCI |
Four
peer PCI buses combine with 64-bit technology to
allow high load, high performance traffic to be
separated from lower performing traffic on the
PCI bus resulting in increased system
performance since the higher speed traffic is
allocated to the higher speed PCI bus |
| Memory |
128MB
- 4GB ECC 133MHz SDRAM memory |
| 8
168-pin (72bit), PC133 DIMM sockets on systemboard |
| Storage |
| Hard Drives |
18GB1,
36GB and 73GB high-performance Ultra3 (Ultra160) SCSI
(10,000 RPM) hard drives |
| 18GB
(1") 15,000 RPM Hot Pluggable Ultra3 (Ultra160)
SCSI hard drives |
| 18GB,
36GB, 73GB fibre channel (10,000 rpm) hard drives
(external only) |
|
SCSI Controllers |
Dual
integrated Adaptec® AIC-7899 Ultra3
(Ultra160) SCSI controller at 160MB/s provides one of
the fastest high-performance SCSI technologies available |
| Integrated
Ultra/Narrow SCSI-3 Adaptec AIC-7880 for CD-ROM and tape
backup devices (for slower CD-ROM and Tape Backup Unit (TBU)
peripherals) |
| Optional
Adaptec Ultra-2/LVD SCSI 2940 card |
| Optional
Adaptec Ultra-3 (Ultra 160)/LVD SCSI 39160 card |
|
RAID Controllers |
| Integrated
PowerEdge Expandable RAID Controller, Version 3, Dual
Channel (PERC 3/Di) with up to 128MB battery-backed cache
(Optional RAID Enabler Kit) |
Provides
RAID levels 0, 1, 5, and 10 |
| Dual
channels gives high degree of flexibility -
duplex drives in the main drive bay, duplex the
drives in the media bay and main drive bay, have
one channel internal and one routed external, or
route both externally and connect them to
external storage |
| Optional
PowerEdge Expandable RAID Controller, Version 2, Dual
Channel (PERC
2/DC) |
| Optional
PowerEdge Expandable RAID Controller, Version 2, Quad
Channel (PERC
2/QC) |
| Optional
PowerEdge Expandable RAID Controller, Version 3, Dual
Channel (PERC 3/DC) |
| Optional
PowerEdge Expandable RAID Controller, Version 3, Quad
Channel (PERC 3/QC) |
|
External Storage |
| Optional
PowerVault 2xxS SCSI
external storage system |
| Optional
PowerVault 660F, 650F, 630F fibre
channel RAID system |
| Optional
Fibre Channel Host Bus Adapter (Optical or Copper) |
|
Tape Backup |
| Optional
PowerVault 100T DDS4 tape drive (20GB/40GB) |
| Optional
PowerVault 110T DLT1 Tape Drive (40GB/80GB) |
| Optional
PowerVault 110T DLT4000 Tape Drive (20GB/40GB) |
| Optional
PowerVault 110T DLT7000 Tape Drive (35GB/70GB) |
| Optional
PowerVault 110T SDLT Tape Drive (110GB/220GB) |
| Optional
PowerVault 110T LTO Tape Drive (200GB/500GB) |
| Optional
PowerVault 120T DDS4 Autoloader (160GB/320GB) |
| Optional
PowerVault 120T DLT4000 Autoloader (140GB/280GB) |
| Optional
PowerVault 120T DLT7000 Autoloader (245GB/490GB) |
| Optional
PowerVault 120T LTO Autoloader (560GB/600GB) |
| Optional
PowerVault 130T DLT4000 Library (600GB/1.2TB) |
| Optional
PowerVault 130T DLT7000 Library (1.05GB/2.1TB) |
| I/O
Slots |
| Quad-peer,
64-bit architecture: 7 PCI slots (Hot-plug slots support 3
separate hot-plug functions: hot-add, hot-replace, and
hot-upgrade) |
2 x 64-bit/66MHz (hot-plug) |
2
x 64-bit/33MHz (hot-plug)
|
| 2
x 64-bit/33MHz |
| 1
x 32-bit/33MHz |
| Drive
Bays |
Hot-pluggable
Hard Drive Bays: Six 1.6" or eight 1.0" hard
drive bays |
| Optional:
Two, hot-plug 1" hard drives can be installed in
multi-media bays bringing internal storage capacity up
to 510GB |
| Externally
accessible removable media bays: Three 5.25"
half-height bays - for one CD-ROM, two available;
dedicated 3.5" diskette bay |
| Up
to 40X max. SCSI CD-ROM |
| Standard
3.5" 1.44MB diskette drive |
| I/O
Ports |
PS/2
keyboard, PS/2 mouse, 2 serial, parallel, video ports |
| System
management bus optional through cables |
| Graphics |
Integrated
VGA-compatible, ATI-Rage IIc controller |
| Communications |
Integrated
Intel Pro/100+ Server Adapter |
| Improves
system availability and allows for Adapter Fault
Tolerance (AFT) by supporting the automatic
fail-over of a primary NIC's traffic to a
secondary NIC. This ensures that the system will
have uninterrupted LAN access when a secondary
NIC is installed |
| Offers
automatic load balancing for outgoing network
traffic |
| Supports
Cisco's Fast EtherChannel (FEC) technology |
| Intel
Pro/100+ Server Adapter |
| Intel
Pro/100+ Dual Port Server Adapter |
| Intel
Pro/1000 Gigabit Server Adapter |
| 56K2
V.90 WinModem supported under Windows NT®
Server only |
| 128K
4-port, PCI BRI ISDN modem |
PowerEdge
4400 Server
