| Processor |
| Microprocessor type |
one or two Intel Pentium III
microprocessors with an internal operating frequency of at least 600
MHz and an external operating frequency of 133 MHz |
| Front side bus |
133 MHz |
| Internal cache |
internal to microprocessor |
| Math coprocessor |
internal to microprocessor |
| Expansion
Bus |
| Bus types |
PCI bus |
| Expansion slots |
three full-length dedicated PCI slots: PCI1 through PCI3 |
| Memory |
| DIMM sockets |
four 72-bit wide, 168-pin sockets |
| DIMM capacities |
64-, 128-, 256-, or 512-MB registered SDRAM DIMMs; must
be certified for 133-MHz operation |
| Minimum RAM |
128 MB |
| Maximum RAM |
2 GB (using 512-MB registered SDRAM DIMMs) |
| External cache |
none |
| Drives |
| Diskette drive |
3.5-inch, 1.44-MB diskette drive included with standard
system |
| Tape drive |
20 GB and higher (optional) |
| SCSI hard-disk drives |
four slots in hard-disk drive bay support formatted
capacities from 9 GB to 18 GB and higher |
| SCSI devices |
an internal SCSI backplane provides a physical
connection, hot-plug capability with an optional integrated RAID
controller (RAID levels 0,1, 5, and 10 supported), termination, and
automatic configuration for up to five internal SCSI hard-disk drives; an
optional fifth SCSI hard-disk drive kit for the peripheral bay; integrated
Adaptec AIC-7899 Ultra3 SCSI host adapter |
| CD-ROM drive |
24X IDE CD-ROM drive included with standard system |
| External
Ports and Connectors |
| Serial |
two 9-pin connectors |
| Parallel (bidirectional) |
25-pin connector |
| Video |
15-pin connector |
| PS/2-style keyboard |
six-pin mini-DIN connector |
| PS/2-compatible mouse |
six-pin mini-DIN connector |
| USB |
two USB-compliant 4-pin connectors |
| Ethernet |
RJ45 connector for connection to internal embedded NIC
(Intel 82559 10/100 Ethernet controller) |
| Video |
| Video type |
ATI RAGE IIC PCI video controller; VGA connector |
| Video memory |
4-MB SDRAM standard
(not upgradable) |
| Power |
| Hot-pluggable DC power supply |
| Wattage |
330 W (each supply) |
| Heat dissipation |
1824 BTU/hr (maximum) |
| Input voltage |
100 to 240 V at 50-60 Hz
autoranging |
| Output voltages and maximum current |
+5 VDC at 35 A
+3.3 VDC at 10 A
+12 VDC at 18 A
–12 VDC at 0.8 A
–5 VDC at 0.3 A
+5 Vfp (volts flea power) at 1.2 A |
| Backup battery |
3-V CR2032 lithium coin cell |
| Physical |
| Rack
mount (2U) |
| Height |
8.4 cm (3.3 inches) |
| Width |
42.4 cm (16.7 inches) |
| Depth |
66.8 cm (26.3 inches) |
| Weight |
15.87 kg (35.0 lb) minimum configuration
24.94 kg (55.0 lb) maximum configuration |
| Environmental |
| Temperature |
| Operating |
10°C to 35°C (50°F to 95°F) |
| Storage |
–40°C to 65°C (–40°F to 149°F) |
| Relative
humidity |
| Operating |
8% to 80% (non condensing) 10% per hour gradient |
| Storage |
5% to 95% (non condensing) |
| Maximum
vibration |
| Operating |
0.25 G (half-sine wave) at a sweep of 3 to 200 Hz for 15
minutes |
| Storage |
0.5 G at 3 to 200 Hz for 15 minutes |
| Maximum
shock |
| Operating |
six consecutive shock pulses in the positive and
negative x, y, and z axes (one pulse on each side of the system)
at 41 G for 2 milliseconds |
| Storage (non-operational) |
six consecutive shock pulses in the positive and
negative x, y, and z axes (one pulse on each side of the system) at 71 G
for 2 milliseconds |
| Altitude |
| Operating |
–16 to 3048 m (–50 to 10,000 ft) |
| Storage |
–16 to 10,600 m (–50 to 35,000 ft) |
Dell
PowerEdge 2450